This item -- Makita DA3010F 4 Amp 3/8-Inch Right Angle Drill with LED Light -- is one of My Wood Working Plan's collection on Wood Working Tools. Brought on this site by My Wood Working Plan, the resource for wood working plan project.

BooksTools & Hardware

Makita DA3010F 4 Amp 3/8-Inch Right Angle Drill with LED Light

Today's tips: "Best is reviewing several wood working tools first, prior to purchasing ..."

---

NOTE: All online transactions are processed at Amazon.com's secure server,
using the latest technology on internet's secure transactions.

Publisher: Makita

Brand: Makita
List Price: $361.20
Our Price: $189.76
You Save: $ 171.44 ( 47% )
(prices subject to change)
Availability: Usually ships in 24 hours

Average Customer Ratings:

4.0A Motor, 3/8" Angle Drill With LED Light, For Industrial Applications, Variable Speed, 0 To 2,400 RPM For Controlled Drilling, Paddle Switch With Speed Limiting Dial To Prevent Over Tightening.


DESCRIPTION:

Binding: Tools & Hardware
Brand: Makita
EAN: 0088381046947
Feature: Built in LED Light illuminates the workpiece for superior visibility
Label: Makita
Manufacturer: Makita
Model: DA3010F
Publisher: Makita
Studio: Makita


FEATURES:

• Built in LED Light illuminates the workpiece for superior visibility
• Compact design and lightweight for tight quarters work
• Variable paddle switch with dial stopper for pre-setting desired speed
• Side grip handle can be installed for better leverage
• No load speed of 0-2,400 RPM



ACCESSORIES:

• Makita 784827-A Quad-Driver 4 Piece Reversible and Self-Centering Pre-Drill, Drive and Countersink Set
• Makita 784832-A Quad-Driver 13 Piece Pre-Drill, Drive and Countersink Set
• Makita 192077-2 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills
• Makita 784000-A-A UltraLok 5 Piece 1/16-Inch to 3/16-Inch Hex Shank Drill Bit Assortment
• Makita 784810-A-A 4-5/8-Inch Bit Tip Holder and 3-1/8-Inch Bit Tip Holder with #2 Phillips Bit Tip and Slotted Bit Tip


SIMILAR ITEMS:

• Irwin 3041006 Speedbor Max 6 Piece 1/2-Inch to 1-1/4-Inch Self Feeding Spade Bit Assortment
• Bosch 1590EVSK 6.4 Amp Top Handle Jigsaw
• Fein 63502151020 1-1/8-Inch Universal E-Cut Blade, 3 Pack
• Kreg K3MS K3 Master Pocket Hole Jig System
• Fein 921072K13 Step Adaptor


CUSTOMER REVIEWS:

Customer Rating:
Summary: Nice light to med. duty RA drill
Comment: 3/8th right angle drills or compact drills if you will are misunderstood tools. They are often put to use on jobs the manufacturer never intended them for. I am just as guilty as the next guy of this. I often overtax a tool to test its limits.

This tool is a light to medium duty drill. It is not a hole hawg or Timberwolf. It will not be able to run augerbits and self feed bits like those drills! It is a 4 amp 3/8ths drill-Much like other 3/8ths drills, I found this drill to be right at home drilling holes that were under an inch in diameter using standard twist bits or paddle bits for boring larger holes.

Under extended heavy useage I found the drill got very hot. But I was pushing it pretty hard by making 3/4 inch holes to run romex through multiple studs.

The drill itself is a nice piece of engineering- The head of the drill is only 2&5/8 inches wide, allowing you to get into some tight spots. The chuck is a keyed design that requires use of a key to tighten the bit. the chuck grips tight when all 3 holes of the chuck body are tightened with the supplied key.( there is even a holder for the key on the cord)

There is an LED light that illuminates the work area when the bar trigger is depressed that is slick for when you are working in a dark area with little ambient lighting. The drill has variable speeds of 0-2400 that can be varied by setting a maximum speed control dial on the trigger, or just varying the amount of pressure on the trigger.

This drill is reversible, but I found that the reversing switch placement at the rear of the tool made it difficult to access during use. Putting the switch up by the front might have allowed the user to manipulate direction with a thumb.

If you are driving screws with this drill, I would recomend predrilling as I foud it difficult to get pressure behind the drill as easily as a standard pistol grip drill.

I would have liked to have seen this drill come with a case. At 200 dollars, that is a feature many look for in a tool purchase. There are no bits either, if you were wondering. You get a cardboard box and a side handle with this tool. The side handle screws into either end of the head of the drill.

In my decision to buy a compact 3/8 drill, I considered:
1) Dewalt 18 volt DW960- Bought it and found when pushed too hard it grenades the gears.
2) Bosch 1132 Compact drill- very similar to the makita, but no side handle and a slight bit less compact.
3) Hitachi D10yb- Again, similar to the Makita, actually has a bit more power(4.6 amps vs. 4 amps) Has a side handle, but other peoples reviews complained of the slide type switch. The speed is controlled by a dial, not the trigger.( in hindsight I might have bought this drill instead of the makita) 5 year warranty.
4) Milwaukee- Bad rep for weak geartrains.
5) Dewalt DW160- No reverse! Cannot back out a stuck bit!

All in all I am happy with the purchase. The heating up is something I will have to watch out for and I will update if it leads to tool failure
Customer Rating:
Summary: Makita DA3010F R/A Drill
Comment: I just used my Makita for the first time for disassembling a number of basement storage shelves to move to a new house. Some of the shelves were in dark unlighted lockers and the Makita LED light made a difficult job easy. You simply press start, which switches on the light, identify the screw head, and bingo, out comes the screw! The Makita is light, easy to handle and the controls are intuitive and simple to adjust. I am pleased with this powered version because my several cordless drills are constantly running out of power and I won't have to worry about that with this Makita.
Customer Rating:
Summary: Great Right Angle Drill
Comment: Great Tool! Lightweight, compact, totally functional. The only improvement needed would be a compact Keyless Chuck.
Customer Rating:
Summary: Use for drilling only
Comment: I bought this drill for two things: drilling and driving wood screws. The Makita does not do a good job driving screws because it lacks the speed control necessary for such work. When driving a 3" screw into a predrilled hole in douglas-fir, the drill will torque stall with the screw driven about 2/3 of the way home. No big deal, just squeeze the trigger a little more -- but a slight increase in trigger squeeze results in the drill speed jumping to full rated RPM - which causes one to either overdrive the screw, or to twist off the head. Either result is not acceptable. The speed control seems to be a two-stage affair - a slow speed low torque range for driving screws (nominally) and another full speed range with high torque for drilling. The transition between the two is very abrupt.

I also found the drill's chuck to be clumsy to operate. If a knurled ring were installed such that one could grip the chuck barrel by hand, one could hand tighten the chuck onto a drill most of the way. Some drill press chucks have this feature. As it is, one has to use the chuck key which takes a while, and furthermore the use of the chuck key tends to result in the spindle turning and the chuck key hitting the housing that the LED is mounted into. In any case, the mounting of tools in the chuck could be improved. The lack of a case to store a $200 investment is unfortunate.

I liked the removable handle, the very nice fit and finish of the drill, and the generous electrical cord length.
Customer Rating:
Summary: well designed and constructed drill
Comment: I had purchased the Dewalt equivalent but did not like the way the switch worked. I thought it would be awkward when in use. The Makita will fit into a narrower space than the Dewalt. The LED light is very useful and the switch lever works well. This drill has tons of power even at low rpm. One caution. These right angle drills are harder to use when installing screws. The small head means it is easier to get "off center" with the screw versus using a standard drill. The result is that you can strip the screw pretty easily. You must use more caution, proceed slowly and make sure you don't have a worn bit to get the best results. Once you master its use, it will go places no regular drill can touch!!

---

NOTE: All online transactions are processed at Amazon.com's secure server, using the latest technology on internet's secure transactions.
| Power tools |